PLEASE PUT COLOR IN COMMENTS
This is for a Ready to Press Transfer only.
The transfer you receive will not have a watermark on it!
Applying the Heat Transfer Vinyl transfer can be done using a regular household iron or heat press. Can be pressed onto any fabric of your choice dark or lights colors. Transfers will come with a carrier sheet on top. Carefully remove the carrier sheet and place design up to press.
Some designs may come with a small white border depending on how much detail is in the design.
Preheat garment for 2-3 seconds Apply design at 305°F / 150°C (EasyPress® users add approx. 30°) Use medium pressure for 10-15 seconds Peel carrier hot or cold Cover and reheat for 2-3 seconds.
Laundering: Wait 24 hours before first wash Machine wash cold with mild detergent Do not bleach or dry clean Dry on normal dryer setting
Must be pressed 50% polyester or higher. 100% polyester for best results. Works best on light or white garments. These transfers do not print white where there is white in a design the shirt color will show through. You must use a heat press for these transfers a regular iron will not work.
385-400 degrees for 55-60 seconds.
Put parchment or butcher paper inside the garment to ensure the ink does not bleed through to the back. Do not reuse this same paper, discard after use.
Place transfer face down
Remove paper immediately
****Please not that all sizes are approximate and will fit within the given measurement.
****Colors may vary depending on monitor settings and will look different from screen to screen
If there are any questions please ask prior to pressing.
Sizes are based on the LONGEST SIDE of the design. So, an adult size may be 11 inches long but only 8 inches wide so that the design stays proportional. We can print up to 23" - 24' wide on one side but our basic sizes are:
Adult - 11 inches
Youth - 8 inches
Toddler - 7 inches
Infant - 5 inches
Pocket - 3 inches
Oversize - 15 inches